By the oil tank, gear oil pump, monobar mesh filter, imported compressor refrigeration units, meters, pipes, valves, pressure regulator electrical control device can be composed of thin oil station, system work by the gear oil pump, from the refrigeration tank suction, through the check valve, monobar mesh filter, according to the use of pressure is sent to the transmission part of the equipment, after lubrication work, Pass through the mesh filter back to the tank.

Low pressure oil station is mainly composed of oil tank, low pressure oil pump device, check valve, double barrel mesh filter, plate cooler, valve, automatic cut-off electric heater, thermometer, pressure gauge, pressure controller, oil level ruler, high and low oil level alarm and so on.

Thin oil station is generally divided into two major systems, low pressure oil supply system and high pressure oil supply system. It is mainly composed of two low pressure gear pumps, two high pressure plunger pumps, double barrel mesh filter, oil cooler, oil tank, valve and some oil supply pipelines, plus electrical control cabinet. The high and low pressure pump power is generally 2.2KW, but this is not fixed, and can be configured according to the working conditions of the host. The working pressure of the low pressure oil supply system is 0.4Mpa, and the pressure of the high pressure oil supply system is 31.5Mpa. The pressure can be adjusted by adjusting the valve. When the host is started, low speed or stopped, the high pressure system is used to form a layer of static pressure oil film, and after running for some time until the host has a dynamic pressure oil film, the high pressure pump stops supplying oil, and the low pressure pump continues to supply oil to ensure the needs of the host operation lubrication.

Hydraulic: Hydraulic elevator lifts are used as hydraulic pumps on hydraulic drives in the industry, for boosters and/or pumps hydraulic oil based on mineral oil or hydraulic lubricating fluids, such as: As hydraulic press, forging hammer, baler, baler, plate press, winch, hoist, variable pitch propeller and rudder adjustment unit, hatch, hydraulic rolling mill and machine tool hydraulic system, hydraulic oil pump, lubricating oil pump, fuel transfer pump, heating furnace hydraulic station, blast furnace fan lubrication station, finishing rolling thin oil station, rough rolling thin oil station, hydraulic equipment, HGC circulating pump, Finishing rolling transmission circulating pump, winding thin oil station, finishing high and low pressure thin oil station, rough rolling high and low pressure thin oil station.

Some enterprises lack of understanding of thin oil station, poor management and use, resulting in slipper or large tile damage. The maintenance of sliding shoes or large tiles requires poor time and large maintenance workload. Therefore, in order to improve the operation rate of rotating equipment, in addition to the maintenance of the equipment itself, how to use the oil station is the most important thing.